- jediairwear@gmail.com
- Current suit production time: 3 weeks
CURV
CURV
CURV “Fully Loaded”
$3299.00
Description
Curv
The CURV 2.0 is the flagship of the Rigging Innovations product line and is the most technically advanced skydiving container system in the world. The CURV 2.0 is the 4th generation of what began with the Talon 1 in 1985, to the Flexon and the invention of the articulated harness in 1992, through the radically aerodynamic Voodoo in 2000, and now has culminated in the most aerodynamic and ergonomic container system ever. Mating the Bio Yoke and Bio Curv back pad container designs with the latest generation articulated harness, results in a system the makes all others obsolete, including our previous RI designs. The adaptability of these two concepts is without a doubt the most comfortable skydiving rig you will ever jump. The new RI MOJO Mard system is available as an option or can be easily retrofitted without any modification to the harness and container.
CURV “Fully Loaded” $3299.00
Container highlights
- Eliminates the gap between the rig and your back by curving to conform to your body
- Specially designed end tabs that result in a lower profile of the main container
Harness highlights
- The upper harness is built from TY-8 webbing for comfort and flexibility.
- Stainless steel hardware is standard for looks and durability.
- All housings are completely fabric-covered for looks, and utilize stainless steel clamps for security.
Bonus/accessories highlights
- BOC stowage flap helps; with hackey-handle placement for a more consistent pull.
- “Sure-Grip” emergency handles provide extra assurance for those times you really need it.
-
The CURV skydiving container incorporates the Bio CURV backpad where the profile of the backpad, instead of being straight, is curved inward at the midpoint and follows the natural curve of the back. This allows the containers to hug the back intimately and eliminate the gap between the back and the rig. -
A totally new concept is the “Bio-Yoke” configuration (Patent Pending). This design concept incorporates a secondary shoulder yoke that holds the containers higher on the back and relieves the pressure of the regular shoulder yoke with its associated webbing and hardware. The Bio-Yoke spreads the load evenly across the back and shoulders. -
The fit of the CURV is more akin to wearing a vest or backpack than putting on an older style rig. With the distribution of the weight across the entire back, the perceived weight of the system is less than the actual weight. -
The inside of the yoke and leg pads are built with an inside seam resulting in greater comfort. -
The main container side flaps incorporate specially designed end tabs that result in a lower profile of the main container. -
The CURV harness has become the standard of the world for fit, comfort and strength. -
The 3-ring geometry has been changed to slightly lower the 3-ring location for a more comfortable seated position during canopy flight. -
The lower hip ring geometry has been changed to allow more flexibility of the horizontal back strap, allowing the containers to seek a more natural location on the back. The leg strap junction has been totally re-designed to provide greater comfort and security around the upper thigh. This holds the leg strap and pad in place and prevents them from sliding down the leg in freefall. This virtually eliminates the need for the “bungee” cross connector. -
The chest strap incorporates a webbing stow band to replace the elastic keepers that stretch out of shape or get lost. -
The lower main lift webs incorporate slim line modular pockets for the 3-ring release and reserve ripcord. -
The pockets also protect the lift web webbing from wear, abrasion and ultra violet degradation, and allow the main lift webs to stretch under high “G” loads, preventing hard pulls of the reserve and 3-ring release. -
Main Pilot Chute and Bridle/ The standard main deployment configuration is a BOC throw-out pilot chute with a Hackey and kill-line collapsible bridle. -
The BOC pocketincorporates a small stowage flap that helps keep the pilot chute from creeping out and positions the handle in the same place every time. -
Reserve ripcord and 3-ring release handle. The pillow ripcord and 3-ring release handle come standard with rubberized “Sure-Grip” fabric for a better grip under all conditions. -
Slider stow A specially designed loop is built into the top reserve flap which allows attachment of a custom designed magnetic slider stow without interfering with the operation of the reserve. -
Hook Knife A high impact hook knife and pocket is integrated into the right side main lift web cover and 3-ring release pocket.
